Safety Data Sheet
5/208 Thames side studio
MATERIAL SAFETY DATA SHEET
4tth June 2020
1 - Identification of Product and Supplier
Product Name Monshea 250ml Shea nut oil, Shea butter oil, Shea butter for hair, Natural body oil, Acne scar treatment, Bath oil dry skin, Body oil dry skin Body massage oil, Natural hair products, Natural hair care,
Supplier: Monshea Limited
2 - Composition and information on ingredients:
The product does not belong to any list of substances supposedly hazardous to human or animal health according to EU guideline 548/67 and further amendments, nor to those having recognised exposition limits.
INCI Name: Butyrospermum Parkii (Shea) Oil
Chemical composition: The fractionated and refined oil obtained by pressing the kernels of the shea, Butyrospernum parkii, Sapotaceae. then the crude oil is refined.
H-No: CAS No:
Status: Natural CoE No:
FEMA: Additives: None
FDA: IFRA: Not restricted
Application: Creams, Lotions, Moisturizer Function: Skin and Hair conditioning agent
CTFA Monograph ID: 11948
3 - Hazards identification:
Concentrated product, Observe good housekeeping procedures
4 - First aid measures:
Inhalation: Not a direct hazard.
Eye contact: Rinse immediately with plenty of water for at least 15 minutes. Contact a doctor if symptoms persist.
Skin contact: Wash thoroughly with soap & water, flush with plenty of water. If irritation persists, seek medical advice.
Ingestion: Not considered dangerous. Seek medical advice in case of any adverse effects.
Others: When assessing action take Risk & Safety Phrases into account (Section 15)
5 - Fire - Fighting measures:
Extinguishing media: Use CO2, Dry Powder or Foam type Extinguishers, spraying
Recommended: Extinguishing media to base of flames. Do not use direct water jet on burning material.
Special measures: Avoid vapour inhalation. Keep away from sources of ignition. Do not smoke. Wear positive pressure self- contained breathing apparatus & protective clothing.
Extinguishing procedures: Closed containers may build up pressure when exposed to heat and should be cooled with water spray.
6 - Accidental release measures:
Personal precautions: Avoid contact with skin eyes and clothes. Note that spillages constitute a slipping hazard. Use individual protective equipment (safety glasses, waterproof-boots, suitable protective clothing) in case of major spillages.
Environment precautions: Keep away from drains, soils, surface & ground waters.
Cleaning up methods Remove all potential ignition sources. Contain spilled material.
Cover For spillages: with an inert or non-combustible inorganic absorbent material, sweep up and remove to an approved disposal container. Clean with hot water & detergents. Observe state, federal & local disposal regulations.
7 - Handling and storage:
Precautions in handling: Apply good manufacturing practice & industrial hygiene practices. Observe good personal hygiene, and do not eat, drink or smoke whilst handling. Avoid static discharges.
Storage conditions: Store in tightly closed original container, in a cool & dry area away from heat sources & protected from light. Keep air contact to a minimum.
Fire protection: Keep away from ignition sources & naked flames. Take precautions to avoid static discharges in working area.
8 - Exposure controls and personal protection:
Respiratory protection: No special measures under normal conditions.
Skin protection: No special measures under normal conditions.
Eye protection: Use safety glasses if there is a risk of splashing.
Work/hygiene practices: Wash hands with soap & water after handling.
9 - Physical data and chemical properties:
Colour: Pale yellow
Odour: Free from rancid and foreign odours
Flash-Point (°C): >300
Refractive Index @ 20 °C: 1.465 – 1.475
Acid Value: ≤ 1.5
Iodine Value: 50 - 75
Saponification Value: 180 – 200
10 - Stability and Reactivity:
Reactivity: It presents no significant reactivity hazards, by itself or in contact with water. Avoid contact with strong acids, alkali or oxidising agents.
Decomposition: Thermal decomposition products are H2O and CO2
11 - Toxicological information:
Data not available
12 - Ecological information:
Biodegradability: Product is expected to be biodegradable
Precautions: Prevent surface contamination of soil, ground & surface water.
13 - Disposal considerations:
Avoid disposing to drainage systems and into the environment. Seek expert advice.
14 - Transport information:
Road (ADR/RID): N/A
AIR (IATA): N/A
SEA (IMDG): N/A
CHIP: See section 15
15 - Regulatory information:
Risk Phrases: N/A
Safety Phrases: N/A
16 - Other information:
Cosmetics Directive – 7th Amendment – Not restricted
Lacquer lined steel/tin
SHELF LIFE When stored within advised conditions, re-test after 12 months then at 6 monthly intervals up to a maximum shelf life of 24 months.
Q.C. REQUIREMENTS In-line with general product specification. Always satisfy suitability for specific application. The data provided in this material safety data sheet is meant to represent typical data/analysis for this product and is correct to the best of our knowledge. The data was obtained from current and reliable sources, but is supplied without warranty, expressed or implied, regarding it’s’ correctness or accuracy. It is the user's responsibility to determine safe conditions for the use of this product, and to assume liability for loss, injury, damage or expense arising from improper use of this product. The information provided does not constitute a contract to supply to any spec